Off-Shore Accessories

(Click here to purchase one of these items) 

Harnesses are made from heavy gauge black textaline, filled with semi-rigid, closed-cell foam and vertical stiffeners.  Both models have grey webbing accents with quality stainless and bronze hardware and 2” elastic with velcro closures.  Adjusts from 34”-55”.

H-61J  JUNIOR BACK HARNESS
A smaller light weight harness.  Can be used with our light tackle or heavy duty gimbal.  Recommended for fish up to approximately 50 pounds.  An ideal harness for the ladies.

H-60  BLACK MAX HARNESS
A heavier harness that provides maximum back support while fighting larger game fish such as tuna, shark or marlin. 

Gimbals are constructed from a heavy plastic face plate for stiffness, and has a form fitted closed cell or latex rubber backing for comfort.  Only quality brass and stainless steel hardware is used.  Can be purchased with a cross bolt or an anodized aluminum cup to provide strength in multiple plains, and non-slip rod engagement.  Gimbals feature a new ez-adjust fastening system so you can keep one hand on the rod while adjusting the gimbal strap with the other.  Adjusts up to 48”.

LTG-1  LITE TACKLE GIMBAL
Strong cross bolted rod gimbal construction with closed cell rubber back.

LTG-2  LITE TACKLE GIMBAL W/ CUP
Features anodized aluminum cup for ease in mounting rod in gimbal with closed cell rubber back.

H-70 BLACK MAX GIMBAL
Heavy duty ABS plastic, cross bolted heavy duty stand up model, with dense latex backing.

H-71 BLACK MAX GIMBAL/ CUP
A super strong gimbal similar to the H-70.  Has anodized aluminum cup for positive rod function.

CHUM BAGS  C-30, LC-30

Chum bags are made from the same heavy duty fiber interlaced nylon as our fish bags.  The C-30 will hold a standard 12” diameter x 15” high, 5 gallon bucket.  The LC-30 measures 7” in diameter x 16” high.  Both models clean-up in seconds, and can be rolled tightly for storage.  Chum bags are a must for shark, blue, weak, sea trout, and tarpin fishing.  Eliminates the need for hand chumming by slowly releasing chum into the waters.

SEA ANCHORS    SA-18, SA-24, SA-30, SA-36, SA-46 

Attach to your bow to keep boat into the wind or slow you down for lake trolling.  A must for shark fishing and tuna chunking.  Will hold your boat so lines go out to the sides or stern.  Stops your boat from spinning into an undesirable position.  Made from a lightweight but strong, neoprene coated nylon scrim with tough nylon strapping. 
SA-18 recommended for 12’-14’ boats
SA-24 recommended for 15’-17’ boats
SA-30 recommended for 18’-23’ boats
SA-36 recommended for 24’-27’ boats
SA-46 recommended for 28’-46’ boats

ALUMINUM ROD HOLDER      ARH-1 

Notched design to slip into all conventional gunwale rod holders.  Rod sits 9” deep in the holder into a 1/4” diameter stainless bolt.  This product holds your rods like an outrigger, allowing further spread of rods on your boat.  Made from 1/8” thick walled black powder coated aluminum, with a rubber sleeve pressed into the tip to protect the rod.  All stainless hardware is used with a heavy brass safety clip and 1/2” heavy weight nylon webbing.

REEL COVERS  R-50, R-80          Keep salt out of your reels.  Neoprene coated nylon with velcro closures.  Puts on in seconds.  Great for transporting your reels in poor conditions.  These are the least expensive and most durable reel covers on the market.

ROD WRAPS    RW-1, RW-2

RW-1 fits reel sizes 20-50#.
RW-2 fits reel sizes 80-130#.

Rod wraps keep salt out of reels and roller guides.  Made of light weight cordura nylon with velcro length adjustment and drawstring reel closure.  Great for transporting your valuable rods and reels.  Rod wraps are 8’ long, fully extended.

ROD AND REEL SAFETY LINE
RRSL-1 (6’)
RRSL-2 (10’)

Protect your rods and reels from an accidental release of the rod when the bite is on.  The looped end attaches to the cleat, and then the heavy brass clip attaches to your reel.  Made from 3/4” nylon webbing.

WRECK ANCHORS   A-30, A-40          For the bottom fisherman to hold fast on wrecks. A single one of its hooks will hold a 45’ boat in moderate sea.  When release is desired simply power back and the hook(s) will straighten and release.  They can be re-bent many times without breakage.   The A-30 holding prongs are made from 5/16” rod, and is recommended for boats 18’-25’.  A 1/2” line is recommended.  The A-40 holding prongs are made from 3/8” rod, and is recommended for boats 26’-50’.  A 5/8” line is recommended.

 ROD MOUNT BUCKET HOLDER         RMBH-1 

This unique new product for fishing enthusiasts provides a clever way to store and mount your chum buckets while trolling or drifting, and minimizes clutter on your deck.  The unit is constructed of 1” diameter - 1/8" thick wall black powder coated aluminum tubing, has a 12.5” mounting vertical which is notched at the bottom to hold snugly into standard 45°  rod holders.

The 6" shaped platform snaps into the bottom of a standard 5 gallon bucket.  A bungie strap wraps through the (2) welded right angle mounts and clips onto the top of the bucket.  This mounting arrangement holds your buckets snugly in place through the even the roughest of seas.  (bucket not included).

NET COVER NC-1
A must have.  Keeps nets from snagging items on your boat.  Easy install and removal with a full #10 coil side zipper.  Made from a lightweight but tough marine grade ric and #10 YKK zipper.  Simply slip net in and zip downward.  Fits up to (3) 28” wide nets.  

FISH CLEANING APRON  FCA

A reasonably priced and durable apron to keep clothing clean while cleaning your fish. Commercial quality.  Cleans easily and does not stain.  Has a pocket for pliers, plastic bags, sharpener, etc.

FISH CLEANING SLEEVES  FCS

Full length sleeves.  Soft  elastic near the wrist, with an adjustable velcro strap to fit comfortably around your upper arms.

TAIL ROPE    TR-1

Full 1/2” nylon, heavy duty splice, dipped ends, 8’ long.  More practical than using a 25’ dock line.

BENT BUTT ROD CARRYING CASE  BBR-1        Designed to store and protect bent butt rods.  Made from breathable textaline and 20 gage clear glass front.  Bound in black vinyl.  Has 1” black webbing handles for carrying.   Measures 22”  high x 22” wide (at widest points).